Did you know making a decision as simple as choosing a different motor oil for your vehicle can increase your fuel economy by over 2%?
Our team has assembled a rundown of the best oil for Nissan Rogue for the drivers since we realize how troublesome it tends to be to explore the huge measure of alternatives out there.
In choosing any one of our Nissan Rogue Oils you can be assured of its high standard of quality.
Click here to skip to our recommended pick!
- Meets the API SN Plus classification protecting engines from LSPI
- Excellent engine cleanliness
- Outstanding high-temperature protection under severe driving conditions
- Nissan Approved Oil for Rogue
- Meets The Requirements of ILSAC GF-5 API,SN,SM,SL
- High-temperature protection up to 400 degrees F
- Best for high mileage Nissan Rogue
- API SP/SN PLUS/SN
- ILSAC GF-6
- API SN, SM, SL
- ILSAC GF-6A
- Low viscosity, advanced synthetic formula
Our Overall #1 Rated Pick
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil
Valvoline Advanced Full Synthetic is a premium full synthetic motor oil that is formulated with the highest quality synthetic based oils, and with premium additive chemistry, to meet the demanding requirements of turbo-charged and gasoline engines.
These oil has are specifically formulated to provide high levels of fuel effeciency and deposit protection under service conditions.
Innovative anti-wear additives provide 40% more wear protection than industry standards.
The oil is designed to withstand high or low temperatures without freezing or oil burning.
Now with improved performance against the four main causes of engine breakdown: wear, friction, heat and deposits. Additional product benefits include:
- Meets the API SN Plus classification protecting engines from LSPI
- Excellent engine cleanliness
- Outstanding high-temperature protection under severe driving conditions
Nissan Rogue Oil Recommended by Manufacturer
The recommended oil type for the 2014-2019 Nissan Rogue is a SAE full synthetic at a viscosity of 0w-20.
Select only engine oils that meet the American Petroleum Institute (API) certification or International Lubricant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard.
NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed.
Nissan Rogue Oil Capacity
Your Nissan Rogue will require to 4.9 quarts with a new filter. Or 4-1/2 qt without oil filter change.
Nissan Rogue Oil Recommended By Mileage
| Mileage | Brand |
|---|---|
| 0 – 75,000 | Genuine Nissan 0W-20 Oil |
| 75,000 – 150,000 | Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil |
| 150,000-300,000 | Castrol EDGE High Mileage 5W-30 Motor Oil |
Best Oil for Nissan Rogue
The top best product [hide]
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil
Genuine Nissan 0W-20 Oil
Castrol EDGE High Mileage 5W-30 Motor Oil
Mobil 1 0W-20 Advanced Fuel Economy Motor Oil
How to Change Oil on Nissan Rogue
Oil change measure (following howtune.com)
1) Lift the front of the vehicle utilizing your inclines or a jack and jack stands.
2) Pop the hood open. Utilize the delivery switch on the base driver’s side of the scramble.
3) Locate and Remove the oil fill cap. Channel the Oil
4) Locate the oil channel attachment and spot your channel container under it.
5) Remove the 14mm oil channel plug.
6) Install another channel attachment and pulverize washer. Force to 22-29 ft-lb (29-39 N·m).
7) Move the Oil channel container underneath the channel.
It’s situated on the traveler side of motor, directly behind a plastic sprinkle watch in the wheel well.
8) Remove the oil channel.
Simply push the plastic board fold far removed and utilize an oil channel wrench to extricate and eliminate the channel.
9) Screw the new channel on, fixing it per the directions on the container.
Mobil1 channel directions state to situate the gasket and fix one 3/4 turn. Load up with New Oil
10) Using your channel, top off the oil. It takes roughly X.X quarts.
11) Check the oil level by eliminating the plunge stick, drying it and re-embeddings it.
Check the level by perusing where the oil appears on the end.
12) Visually check the channel and channel plug for spills.
13) Lower the vehicle back to the ground.
14) Start up the motor and watch the oil constrain light to ensure it doesn’t remain on.
15) Re-check the oil level and check again for spills.
Add comment